Read before you buy!!!
— ** Because the production batches of the products are different, the visible light transmittance of products will have a slight deviation between 1-10%. thank you for understanding.**
It's thickened and a little hard. so it is not easy to shrink. The thicker the thickness, more difficult to install.
you can touch it and compare with other films. it is a little thicker than ordinary films.
Heating film is the most important step for installation.
so you will have to take more than 30 minutes to heating film to let it shrink.
do not spray much water on the film when heating, it will affect the shrink.
INSTRUCTIONS:
Notice: Measure the size of the car glass, the length and width of each one plus more than 3 cm, so as not to install the film does not conform to size.
A clean window is vital a successful factor,so keep window or glass clean.
The first step : put the film outside of the window and heating the shape of
film. don't peel off the backing in this step. refer to this video
//we.tl/t-Crhk1gtsVq
heating time is half an hour.
The second step: remove your old film in the car, Clean the glass with
Specialized degumming detergent. Clean the glass at least three times to ensure
that all old glue is removed.
The third step: refer to this installation video //we.tl/t-U3mQISBJeL
NOTE:
1.Before installing , please check the film carefully,if you find any creases,tears or other defects,please contact us immediately for advice.Don’t remove the backing sheet or attempt to fit your film .We are unable to accept returns or provide refunds if installation has been attempted.
2. don't get wet the film . do not wash car in a week after installation!
Specification:
1.Material:PET
3. Visible Light Transmittance rate （VLT）: 74%
4. UV protection (UVR):100%
5. Heat Insulation(IRR): 95%
6. Thickness: 2mil
7. Production process: Nano ceramics
8: color: clear to blue . as picture
Packing Includes:
1 roll car window film
